At Infura, we believe testnet ETH should be free and easily accessible.

As an Ethereum developer, you know how important it is to test your dapps before deploying them to the mainnet. However, testing can be challenging when you need to acquire Sepolia testnet ETH to fund your smart contracts and there’s nowhere to turn.

Aligned with Infura’s mission of making building in web3 easy and accessible to everyone, we're releasing Infura’s new Ethereum testnet faucet that drips 0.5 ETH daily requests.


Why we created the Infura testnet faucet


At Infura, we believe testnet ETH should be free and easily accessible. Recent shortages of testnet ETH have caused significant problems for developers, who have had to purchase GoETH on the open market.

The monetization of GoETH led to speculators driving the price to $1.61 per token, and one user even purchased a Cryptopunk using funds from GoETH transactions.

Because testnet ETH should be free and easily accessible, the Ethereum Foundation is shutting down Goerli testnet and requesting that developers migrate to the Sepolia Testnet.

Infura's new testnet faucet is here to help the ecosystem by providing a reliable, high-volume drip of Sepolia ETH. Facilitating web3 development QA procedures on a test network is critical to the future of blockchain implementation at the protocol level. Access to a stable, high-volume faucet will make web3 development easier for developers.

With this faucet, you can request free testnet ether with just a few clicks. Want to see for yourself?

Here’s how.


How to use the Infura testnet faucet


To use the Infura testnet faucet, follow these simple steps:

First, to go: https://www.infura.io/faucet/sepolia.  

Then enter your Ethereum address into the open field. (More detailed steps to do this are here: How to get your Sepolia Wallet address on MetaMask)

Next, click the login button to access your Infura account.

Click "Receive ETH" and wait for the transaction to be processed. You can follow the Etherscan link for transaction verification.

Check your MetaMask wallet to confirm you’ve received your testnet ETH. You can do this on the Sepolia network. (Reminder: Secure your MetaMask wallet)



It's that easy! You can request testnet ETH as often as you need to, but please be aware of the 0.5 ETH daily limit.


Keep learning with Infura


Congratulations! Now you have the ETH you need to test your dapp, publishing a few smart contracts, and even mint some NFTs. Below are a few helpful resources to keep learning with Infura:

 * Getting Started with Infura
 * The Developer’s Guide to the Web3 Stack
 * Get started with using Infura’s NFT API + SDK
 * Read our Infura NFT API Documentation for more ideas
 * Deploy a Smart Contract on Sepolia Testnet and test it out!


Frequently Asked Questions


Q: Can I receive more testnet ETH?

A: The current limit is 0.5 testnet ETH per day, but this could change later.

We may increase testnet ETH rewards for engaging with Infura in the future. Open emails and follow us on Twitter to get the latest updates on test ETH withdrawal limits!

Q: Will you support upcoming testnets like Holesky?

A: We're working closely with the Ethereum Foundation on launching and providing services to additional testing and development in the Ethereum ecosystem. The upcoming Shanghai / Capella upgrade is in scope with upcoming iterations of the feature.

Q: What other features can we expect in the future?

A:  With the recent acquisition of Hal by ConsenSys, we plan to implement an example monitoring service to notify users when transactions are  fully processed. We already use Hal for internal monitoring of transaction processing for manual retries.

Additional FAQs are answered directly on the faucet site.

We hope the new Infura testnet faucet makes your developer experience easier and more pleasant so you can keep shipping your innovations and building the future of web3.

Infura product updates and feature announcements.

Infura Product & Features

Product & Features

Introducing Infura’s ETH testnet faucet: Get 0.5 ETH daily to test your dapps!

The Developer’s Guide to the Web3 Stack

Infura’s NFT API + SDK are packed with all the tooling you need to mint your innovations with ease.

Have you ever wanted to create something beautiful with a few lines of code? What if with just three lines of code you could build an NFT marketplace? Or mint digital art? With the announcement of Infura's NFT API + SDK general release today, you can! It’s never been easier to mint any-NFT-thing you want.  

Over the past several months, the Infura team has been hard at work to create the best NFT tooling possible. It was only June of last year when we started the private beta with a handful of developers, using a handful of endpoints that connected to Ethereum and Polygon.

“ConsenSys products have powered the NFT experience since the very beginning, with a significant volume of NFT transactions in the ecosystem passing through the MetaMask wallet backed by web3’s strongest infrastructure from Infura. Since the limited beta release of our NFT API and SDKs in June 2022, our team has made significant strides in making the NFT toolkit the best tooling builders need to bring their NFT innovation to the world,” said Rob Dawson, Chief Technology Officer, ConsenSys Software.

Today, the Infura NFT API comes with 14 endpoints so developers have access to all the metadata they need for building. The NFT API also includes read and write capabilities from eight blockchain networks, in four languages, with integrated IPFS access.

“With the general availability of the Infura NFT API, we are focused on helping even more developers capture the huge demand of the NFT market and accelerate their building journey with instant access to cross-chain data, pre-built templates, and the ability to mint NFT collections to 8 networks in one integrated product,” Rob added.

Today we want to thank you the 500 participants who took part in our beta programs and gave us such valuable feedback that has allowed us to build the NFT API + SDK we believe will empower creators.

Let’s learn more.


The Infura NFT API + SDK offers superior security with ConsenSys Diligence


While other RPC-providers might have similar endpoint offerings, Infura’s NFT API + SDK is a clear choice for creators and developers who value the safety of their smart contracts.

The Infura NFT SDK comes with three ERC-721 and ERC-1155  templates that cover more than 85% of all NFT use cases. Each template has been pre-audited by leading blockchain security platform, ConsenSys Diligence. This means these templates are not only easily customized with metadata to create and mint NFTs in minutes, but also provide top security.

Being pre-audited means Infura’s NFT templates have been run through Diligence’s smart contract security software, Diligence Fuzzing.

The fuzzing tool battle tests contracts by attacking them with millions of scenarios over and over again until the contract is deemed error-free. The blockchain is immutable and immutable means forever. Why risk your IP using anything else?


The Infura NFT API + SDK offers multi-chain options and compatibility


Infura is an industry leader when it comes to multi-chain compatibility with RPC endpoints to 14 networks. When it comes to the NFT API, 14 endpoints with read/write capability are supported across 8 networks.

This includes early access to the new zkEVM launched by ConsenSys that’s scheduled to be available to the general public in April. Its zero knowledge-rollup technology will reduce blocktimes, latency, and gas fees–significant for NFT dapps.


The Infura NFT API + SDK offers accelerated development with the ConsenSys product suite


Developers using the Infura NFT API can take advantage of accelerated development for their NFT innovations with easy integration to the ConsenSys product suite. Add Infura, Diligence, ConsenSys zkEVM, and MetaMask to your tooling to take your NFT project to the next level.

Developers and creators can use the Truffle Suite to build an NFT dapp, spin up a dev environment to test for free, then check the Truffle dashboard for results and predict gas fees.

Next, download the MetaMask Unity SDK to use the wallet as a login authenticator and automatically connect users and their wallets to your NFT dapp or blockchain game.


Hear what devs using the Infura NFT API + SDK are saying


"Infura’s NFT API removed all the legwork to provide NFT capabilities for our web3 gaming platform. We no longer have to analyze every smart contract on-chain to determine whether they are NFTs or store NFT data and metadata. Using the Infura NFT API means we don't need to worry about scaling our database to account for increased traffic of our wallet application. Infura does it all for us." - Jay Chung, Global Business Development at Intella X / Neowiz

“Infura’s NFT API and SDK helped us very quickly build a dashboard and advanced filtering system for our users by leveraging the high-level API. We did not need to parse a long list of blockchain transactions ourselves to display meaningful information. And compared to some concurrent providers, we’ve never had any issues with the API stability and the rate limiting. Plus, the first tier of pricing helped us grow in our first months without being too expensive.” - Louis Pinsard, Co-Founder & CTO at Dialog


The Infura NFT API + SDK is only getting better


While we believe the Infura NFT API + SDK are built to empower NFT creators today we’re certainly not finished making it the best tooling on the market. Here’s what to expect from the product roadmap:  

 * Six more Diligence-secured NFT smart contracts
   
 * Expansion of the read function, making it even easier for developers to extract, manipulate, and report on metadata.
   
 * Low code and no code offerings for those non-technical creators to ensure every kind of builder can participate in the NFT creator economy.


Get started today


Check out the below demo for step-by-step instructions to get started using the Infura NFT API + SDK today.



The Infura NFT API + SDK is now available for all Infura users. Don’t have any Infura account to use the NFT tooling?

No problem. You can create an account in just three steps for free on infura.io/register.

Happy minting!

Empowering creators with the Infura NFT API + SDK

Ethereum Network Updates, Upgrades, Hard Forks

Infura - Ethereum Network Updates

Network

How To Choose The Right Blockchain For Your Next Dapp

Infura product tips and Web3 tutorials for developers building decentralized applications.

Infura Developer Tutorials

Tutorials

Getting Started With Infura

So, why would you need a hybrid infrastructure model alongside Infura?

Let’s think about how your database is set up. You probably have your own database, which is great. What happens if that database goes down? Would your app continue to run seamlessly, delivering the experience you want your customers to get? Or, would your database shutdown cause outages and crashes in your app?

If the dataset you’re hosting is a public dataset, you have a new paradigm for making your infrastructure much more resilient and reliable by integrating Infura into your overall strategy. Infura implements a reverse proxy pattern internally and can be a highly reliable and performant node in your infrastructure stack, allowing you the ability to have a portion (or all) of your traffic routed to Infura.

You can choose to keep your database as your primary database with Infura as a backup, or vice versa. In this way, Infura will act as an always-on backup for your database, providing a level of flexibility previously not available with a single database running.

You also have the opportunity to use Infura as a stats comparison tool to make sure your performance is up to par. Alternatively, you may need to handle more load (request traffic) than your infrastructure can currently handle. You can route the overflow to an Infura project ID to handle spikes in traffic so your service stays up and running.

There are many opportunities for you to use Infura alongside your own in-house node infrastructure to improve your user experience. Let’s dive a little deeper on how we accomplish this.


What does it mean when Infura implements a reverse proxy pattern?

Let’s review what a normal proxy is first, and then we’ll flip it and reverse it, a la Missy Elliott, to talk about the reverse proxy. A proxy server (or web proxy or forward proxy) is a server located in front of a group of client machines (computers). When those computers make requests, the proxy server intercepts those requests and communicates with the target web servers on behalf of those clients. Basically, a proxy is a fancy word for a request/response middleman.

If you’re a visual learner, here’s a diagram from Cloudflare that shows just where that forward proxy sits:


What is a reverse proxy?

A reverse proxy is a server that typically sits on the edge of your infrastructure. It is responsible for receiving requests from web clients and subsequently routing them to one or more backend web servers.

Here’s another great diagram from Cloudflare to show how the reverse proxy fits in to the whole flow:




One of the main reasons to use a reverse proxy server is load balancing, ensuring the flow of traffic between clients and servers remains smooth. This is one of the main advantages of using both your own node and Infura. In addition, it allows you to cache content and provides web acceleration for improved performance. Lastly, reverse proxies allow for more efficient, secure SSL encryption and protection from DDoS attacks and related security issues.

As we previously mentioned, Infura can be used as a reverse proxy to assist with ensuring the flow of traffic for your clients and servers stays as smooth as possible, making for a more enjoyable user experience.


Some examples of a reverse proxy in action

Let’s first look at how we can set up a very simple reverse proxy using Caddy.

We will use our localhost and a backend HTTP service running on 127.0.0.1:9000 to make sure we’re getting our reverse proxy working correctly.

First, download Caddy. Once that’s downloaded, check out their Getting Started guide here. Or, follow along to learn how to set up a simple reverse proxy!


At this point, you may be running your own node, but since it takes too long to sync one for this article, we can substitute with a simple NodeJS stub to check that our reverse proxy is working correctly. I simply named mine main.js.


const http = require('http');

const hostname = '127.0.0.1';
const port = 9000;

const server = http.createServer((req, res) => {
   res.statusCode = 200;
   res.setHeader('Content-Type', 'text/plain');
   res.end('Reverse proxy success!\n');
});

server.listen(port, hostname, () => {
   console.log(`Server running at http://${hostname}:${port}/`);
});



This sets up a backend HTTP service running on 127.0.0.1:9000 mentioned earlier and will display a “Reverse proxy success!” message if our proxy is working correctly. To start this, run `node main.js` in a different terminal window and leave that connection open!

Next, we will want to create a Caddyfile (literally create a new text file in whatever directory you’re working in and name it Caddyfile). Once you have that set up, we will set up our simple reverse proxy itself inside the Caddyfile with just two lines:

localhost 

reverse_proxy 127.0.0.1:9000



In this instance, reverse_proxy is where we want to get our information from (the original site), and localhost is where we are redirecting to using our reverse proxy.

Now, from the same directory as your Caddyfile in a new terminal window from your `node main.js`, run:  

caddy run



This will start the caddy server and will allow your reverse proxy to work! Now, you’ll notice when you run this that you don’t see the “Reverse proxy success!” message popping up.

That’s because this just started the server. You now need to make a request to “https://localhost” and you’ll see the message. To do this, open another terminal window (that makes three now, for those of us keeping track), and simply run:

curl https://localhost



Running this command will give you the “Reverse proxy success!” message we were looking for, and now you know you’ve successfully set up a simple reverse proxy.


Enter Infura!

Now that we’ve gotten a basic reverse proxy up and running, let’s try one using an Infura endpoint. We will keep our overall setup of using a Caddyfile the same, but we won’t need the backend HTTP service running in the background, as that will be switched to an Infura endpoint.

We’re going to change up how our Caddyfile looks:

localhost 

reverse_proxy https://rinkeby.infura.io {
   header_up Host {/v3/<YOUR_PROJECT_ID>}
}



You will notice that we’ve added in a “header_up Host” inside the reverse_proxy section. This allows us to include our Project ID to both the Rinkeby endpoint and the localhost endpoint we are proxying to.

To test this out, we will need to send a request, so I used web3_clientVersion as an example:

curl https://localhost/v3/<YOUR_PROJECT_ID> \
-X POST \
-H "Content-Type: application/json" \
-d '{"jsonrpc":"2.0","method":"web3_clientVersion","params": [],"id":1}'



When we run this, we get the following output:

{"jsonrpc":"2.0","id":1,"result":"Geth/v1.10.8-omnibus-aef5bfb3/linux-amd64/go1.16.7"}



Cool! But how do I know my reverse proxy is working? Well, if you switch out `localhost` in our curl command to `rinkeby.infura.io`, you get the same output, which shows that our reverse proxy is running properly.


How do you use Infura as a backup for your own node?

We’re going to set things up initially the same as we did in the previous example but with two upstreams, one to our localhost and the other to the Infura node.

Next, we’re going to set up load balancing. Now, what’s load balancing? Load balancing acts like a traffic cop sitting in front of your application servers, routing client requests across all the servers that can fulfill those requests quickly and efficiently.

So how do we set that up?

Since we’re using Caddy, we can refer to their docs for the basics of how to use more than one upstream. When we look at lb_policy, there are many ways to determine which upstream Caddy will use first. Caddy will default to using the first listed upstream and will move down the list if the servers stop responding. In our example, we want to have localhost:9000 from our main.js file be the first upstream, meaning we want our reverse proxy to send the data through our localhost first, so we will identify that by putting it first in our list of upstreams (we will leave our Infura Rinkeby endpoint in as the second upstream):

localhost

reverse_proxy localhost:9000 https://rinkeby.infura.io {
   header_up Host {/v3/66172ed429624788ac264604755ba42c}
}



Since we are using the localhost:9000 port, we want to get that server back up and running. In another terminal window, start the Node server with node main.js.

To make sure everything is set up correctly, let’s run our request through by running the same request from earlier but with the :9000 port included, expecting to get the “Reverse proxy success!” message:

curl http://localhost:3000/v3/<YOUR_PROJECT_ID> \
-X POST \
-H "Content-Type: application/json" \
-d '{"jsonrpc":"2.0","method":"web3_clientVersion","params": [],"id":1}'



and we get the following output:

Reverse proxy success!



Excellent! Now, how do we incorporate the Infura endpoint to be a fallback?

You’ll notice we left the Infura endpoint in our Caddyfile where it originally stood and we asked our proxy to load balance using the first upstream (our localhost), which was how we got that “Reverse proxy success!” message.

Now that we confirmed that we set everything up correctly on our end, we’re going to kill the localhost server, mimicking what would happen if your private node went down. Once we do that, our requests should automatically start routing to the Infura node and we should get something similar to the below output:

{"jsonrpc":"2.0","id":1,"result":"Geth/v1.10.8-omnibus-aef5bfb3/linux-amd64/go1.16.7"}* Closing connection 0



But wait! We don’t get that! Instead, we get an error message.

This is because Caddy only allows us to use either two HTTP or two HTTPS endpoints - in our case, localhost is HTTP and our Infura endpoint is HTTPS.

Luckily, there is a tool we can use to make this work with localhost that will create a TLS certificate and sign it with a CA trusted locally by your device and browser. That tool is called mkcert, and it’s incredibly easy to install by following these steps.

Keep in mind if you’re doing this with your own private HTTPS node, you likely will not need this additional step.

If you are following our tutorial step-by-step (using localhost), be sure to follow all the steps, including updating your main.js file to the below to include the HTTPS requirement and the options constant.

const https = require('https');
const fs = require('fs')
const options = {
   key: fs.readFileSync('<PATH_TO_CERTIFICATE-KEY_FILE>.pem'),
   cert: fs.readFileSync('<PATH_TO_CERTIFICATE_FILE>.pem')
};

const hostname = '127.0.0.1';
const port = 9000;

const server = https.createServer(options, function(req, res) {
   res.statusCode = 200;
   res.setHeader('Content-Type', 'text/plain');
   setTimeout(() => {res.end('Reverse proxy success!\n');}, 1000)
});

server.listen(port, hostname, () => {
   console.log(`Server running at https://${hostname}:${port}/`);
});



When you run the mkcert localhost command from the tutorial, the certificate key file and certificate file used in the code above will be created.

Now that we have our localhost running with HTTPS, we can continue! Since we are running everything with HTTPS, we need to update our Caddyfile to reflect those changes.

localhost:3000 

reverse_proxy https://localhost:9000 https://rinkeby.infura.io {
   header_up Host {/v3/66172ed429624788ac264604755ba42c}
}



Now that we have all our files in order, let’s make sure our Node.js server is running and send that request again.

curl http://localhost:3000/v3/<YOUR_PROJECT_ID> \
-X POST \
-H "Content-Type: application/json" \
-d '{"jsonrpc":"2.0","method":"web3_clientVersion","params": [],"id":1}'



What do we get?

Reverse proxy success!



Perfect! That’s exactly what we want to get, as we have asked our reverse proxy to go to https://localhost:9000 first.

Now, what happens if we kill the Node server and send our request again? Remember last time we did this, we got an error message. This time we should be getting the result from our Infura Rinkeby node:

{"jsonrpc":"2.0","id":1,"result":"Geth/v1.10.8-omnibus-aef5bfb3/linux-amd64/go1.16.7"}



Success!

Our reverse proxy is, in essence, ignoring the localhost node, as it’s not functioning, and is defaulting to the Infura Rinkeby node!

Super easy, right? Now you know how to use Infura as a backup node to keep your services up and running smoothly!


Where can I learn more about reverse proxies?

Take a look at our client story from MakerDAO. They currently use Infura for a multitude of reasons, including using us as a backup node solution to ensure all developers can use the MakerDAO toolkit!

Another great example is the Polygon PoS network. We initially began working with Polygon to share some traffic load for their network, allowing users to access the Polygon networks via Infura endpoints and effectively ensuring their network remains fast and functional, regardless of traffic spikes they may see. We have since increased our partnership so we are now handling 100% of their network traffic.

Check out this blog post highlighting multiple companies across all verticals using a hybrid infrastructure model of their own nodes plus Infura. Get some ideas on how we can help you accomplish your needs, from verifying transactions to providing backup database services!

If you would like to run an Infura node in addition to your own, sign up for a free trial today.

How to Run Your Own Node AND an Infura Node

When enterprise developers build dapps on Ethereum, they often have to consider the entire tech stack and development process. The list of considerations range from application features such as Web2 interfaces to deployment, which is usually on a permissioned network hosted by a preferred cloud provider. Since most full-stack software engineers build off of SDKs and API calls, it’s important to establish the value of the application with consideration of the deployment network.



Get the best of both Web2 and Web3 worlds

Many enterprise blockchain business cases build on the principles of traditional Web2 development. Web2 focuses on operating with a fluid user experience with attention to detail on scalable and responsive code on multiple devices. A valuable decentralized application (dapp) in Web3 redesigns the economics and industry roles while building on complementary existing systems -- instead of fully replacing those systems with analogous Web3 features.

Say you would like to reinvent a syndicated loans issuance platform such as IPREO. This effort would require significant IT resources to spin up a minimum viable product from the ground up if you’re recreating features like tranche issuance calculations or calendar date exceptions. Instead, consider a path to lesser resistance: blockchain modules that connect these digital assets to new liquidity networks. The functionality is a re-issuance of an existing financial instrument to ABC network with a listing on XYZ automatic market maker rather than the full end-to-end dashboard.

To connect to pockets of liquidity, an enterprise developer must deploy with the same smart contract language that is compatible with the Ethereum Virtual Machine (EVM) and look to bridge the assets to networks with the desired investor and issuer markets.


Why build on public Ethereum?

Until now, publishing enterprise dapps on Ethereum requires significant system integration, executive buy-in and high set-up costs. Recently, we have seen more public blockchains working with enterprises to cover non-functional technical needs in order to meet minimum requirements of security audits and performance. However, the relatively tribal nature of the blockchain developer subculture means that mainstream enterprises are still conservative when it comes to building on Ethereum.

If you are an enterprise developer, consider the following advantages of building on public Ethereum vs. permissioned networks:

1. Faster setup and lower total cost of ownership

2. Immutability and longevity of the data stored with thousands of independent nodes

3. Composability and low barrier of entry to decentralized finance (DeFi)




1. Faster set-up and lower total cost of ownership

This is a standard private blockchain journey for a consortium:

After you develop your dapp, a lot of time is focused on node deployment adhering to enterprise software standards. On the business side, you are also trying to build a consortium to agree on the benefits and adoption before the tech is tested.

The consortium model usually chooses a separate tech vendor that does not have single ownership from one consortium member to prevent conflicts of interest. The tech vendor determining deployment and long-term support likely runs the Ethereum nodes on behalf of participants. This will get the product to market faster and focus on the business benefits.

The last step involves time and licenses for adding more nodes and mutualizing infrastructure costs across participants. Compared with private networks that remove tokens from their operation, public networks require ownership of native tokens to fund transactions. This gas cost pays for the infrastructure -- third parties running full nodes and running operations for mining/validating. In my time building enterprise projects, we have never seen this happen.

The public journey is much more straightforward. After you develop your dapp, the deployment is a choice between public networks with updated configurations on your Truffle setup. The added complexity is the gas costs for funding and running your transactions on this network.

To simplify connectivity to EVM-compatible networks, you can use Infura’s Ethereum API to connect your app instantly with a single line of code. Simplify your transaction management with Infura Transactions (ITX) using prepaid accounts without holding ETH on your balance sheets. ITX is a transaction relayer that manages your transactions to prevent dropped or stuck transactions.

You will also likely want to work with a team such as Diligence that can audit your contracts and monitor them when they’re live.

Public Ethereum has an overall lower total cost of ownership when you compare the operational cost of running a system on mainnet rather than focusing on the ownership and maintenance of the network itself.

A consortium may have more control in the private chain and face less security and treasury reviews at first. However, your infrastructure overhead and negotiations on consortium network matters tend to outweigh the convenience and added features of connecting to mainnet.


2. Immutability and Longevity

The Ethereum mainnet is secured by the interaction of thousands of independent nodes run by individuals and miners throughout the world. Private chains typically have a small number of nodes controlled by one or a few organizations. Those nodes can be tightly controlled, but only a few need to be compromised in order to rewrite the chain or commit fraudulent transactions.

At ConsenSys, we’ve recommended public networks to enterprise developers for their resilience of replicated data as you are able to recover more quickly with a larger network of more than 15,000 independent nodes. The more peers you have, the easier it is to find a seed and fully recover your recorded transactions. In consensus decisions, the more blockchain validators there are to verify transactions, the more difficult it is to coordinate a majority decision that may lead to an attack.

In a permissioned network, the security is governed by the node with the least security. Your network is only as secure as the weakest link. Any added nodes to the network may also increase the surface area of attack. Most institutions will recommend a base software security test in order to join as a full node owner. The node owner will have to pass standard penetration testing to prevent any hacking on the node in case it is a bad actor to the entire network.


3. Composability and Low Barrier to Entry on DeFi


The Ethereum network powers a vibrant ecosystem of third party applications and technology including DeFi and NFTs. A highly composable and interoperable system allows you to connect to DeFi to build financial products that enable and combine multiple apps to match specific user needs. The Ethereum mainnet offers enterprise developers the ability to gain access to market liquidity and provide innovative ways for users to participate in the exchange, trading or growth of that liquidity.

When we say composable, it’s much more than just an open banking API. It’s a set of open source live protocol contracts that can be called and extended. We’ve seen pure forks of open source code like with Uniswap to get sushiswap. The market has seen countless copies of DeFi models such as Compound and Aave, and it doesn’t look like things are slowing down anytime soon.

There’s more and more real value happening in DeFi leading us to believe that cryptocurrencies are not a fad. It is here to stay.

Watch Clemens’ presentation “Pitching Public Ethereum to Enterprises” at EdCon 2021.

Interested in building on Ethereum? Contact us to get support on starting your enterprise project.

3 things enterprise developers should consider when deploying on Ethereum

Are you excited by blockchain but don’t have a great deal of experience coding? It can be easy to fall down a rabbit hole of technical tutorials that make assumptions regarding your initial development knowledge. A particularly important topic to grasp is basic security within your code.

As you begin to build out your very own dApp, you will have to include information such as an Infura API key, along with a mnemonic.

If you are new to coding, this is the equivalent of giving a stranger your social security number and keys to your home. Once this information is public, there is no definitive way to ensure it hasn’t been captured by a person or web crawler, which could result in malicious behavior.

So, how can we address this?

Thankfully, we can use dotenv along with git to protect our sensitive information within our project when / if we push to github.

Dotenv is a zero-dependency module that loads environment variables from a .env file into process.env, storing configuration in the environment separate from the code. It is often a convention for environment variables to be stored in a .env file or other mechanisms based on the server you are using.

Note: This article will focus on building out a project using Truffle and Infura.

In our project, we will need to run the following command:

npm i dotenv


Once the process in our terminal has been completed, we will want to make sure we have the dependency successfully installed. Head over to your package.json file and check to ensure that dotenv has been added under dependencies.

Next, at the root of our project, let’s create a .env file:

Here is where you will add all of the sensitive information that should not be shared.

We will make sure we can access our .env information in our truffle.config file. At the top of the truffle.config file, add the following:

require("dotenv").config


This will tell your project to load anything that is in the .env into an environment variable, granting you access to it.

Now, instead of having to put our Infura api key or mnemonic in an exposed file, we can import that information from our .env file.

When it comes to gaining access to our project key we are going to use, sign up to Infura and create a project. In your dashboard, you should see something similar to this:

The following code is an example between the usage of .env and exposed information within truffle.config:

const HDWalletProvider = require('@truffle/hdwallet-provider');

const infuraURL = 'https://rinkeby.infura.io/v3/<project id here>'

const mnemonic = "Your mnemonic here"


rinkeby: {

provider: () => new HDWalletProvider (mnemonic, infuraURL),

network_id: 4,

gas: 5500000,

confirmations: 2,

timeoutBlocks: 200,

skipDryRun: true

},


Imagine if you pushed this up to github. Anyone would have the ability to open your truffle.config file could take advantage of your exposed mnemonic and project id from Infura.

Let’s take a look at that same code and implement better security practices.

Notice how we are calling upon the information without having to directly add to our file.

One important detail, as of now even with an .env file: if you push this project to github, it will show the .env file, which would defeat the purpose!

Take a look for yourself.

This is where .gitignore comes into play. We will need to create a .gitignore file, so we can push this project up to github.

Without getting into git, a quick summary could be git is version control software that keeps track of all of your files and the versions of them. What .gitignore does is it tells git not to keep track of this file along with everything it contains.

If you want to dive deeper into git along with other foundational material, have a look at our Basic Training, a free course that helps ensure you have the fundamental tools when developing.

At our root (similar to the level our .env file lives), we will create a .gitignore. Inside of that file, we will add .env along with any other files you would rather not be pushed to github.

We can now push our project up to github and notice that our .env file is no longer exposed. Our sensitive information is now much more secure.

If you are experimenting with this, make sure you add your .env file to your .gitignore before pushing.

If you are running into issues, remember gitignore ignores only untracked files. If your files were committed in the past, they are now tracked by git. To ignore them, you first need to delete said files, git rm them, commit and then ignore.

Otherwise, you can delete the .env file and run

Git rm .env --cached


Here is a helpful link discussing the removal of sensitive data from a repo if it was previously committed and discusses how to clean the git history. Savvy attackers don't just look at the most recent repository info, they'll look at the history of it as well.

Note: If you come across it in documentation, a question you might have is
“What is env. example”

An env. example file, on the contrary to this tutorial, is actually included in the repository, it is used as an example file for you to know what KEY=VALUE pairs you need for your project. Most often, it is used to copy the .env file and then change the values.

Example of execution:
Enter to the project root directory using your terminal.

Check if .env the file exists or not.

If the file does not exist then create a file named .env.

Now execute the command

cp .env.local .env.


So the .env.sample file has all the ENV declarations defined but without their values. It helps other developers establish/set up the project without having to reverse-engineer the codebase.

So after git clone, you usually execute the command `cp .env.sample .env` and fill in the values with the Infura credentials as we saw in the example above.

Note: When you create a new repo using github, if you scroll down you should see the option to include a .gitignore file so you don’t have to create one yourself in the future.

Hopefully, you found this article on basic security practices helpful as you begin to develop your very own projects. Feel free to join our Discord if you want to continue the conversation, share projects, ideas, and join the community!

Start here with a free Infura account >

How to Use .env to Enhance Basic Security Within Your DApp

Optimistic Ethereum is a rollup scaling solution that allows users to submit transactions on the Ethereum network and get them executed faster for a much lower gas cost. From the perspectives of users and developers, this is a "parallel universe" called Layer 2, or L2, where users typically have the same addresses as they do on the Ethereum blockchain (also called Layer 1 or L1). There are gateways that allow messages and assets to be transferred between the universes.

The Optimism network API largely uses the same JSON-RPC specification as Ethereum and Infura supports all the necessary API methods for building a fully functional application on the Optimistic Ethereum network.


Why are transactions cheaper on Optimism?

On L1 Ethereum, thousands of nodes run your transaction to verify that the proposed block that includes it is valid. This process is expensive and has to be paid for. Unlike on L1 Ethereum, Optimistic roll ups provide faster and cheaper transactions because it allows users to perform most of their tasks off-chain in a "layer 2" protocol. On Optimistic Ethereum, the smart contract has only two tasks: deposits/withdrawals and verifying proofs of transactions on chain. This makes the process more efficient and a lot cheaper.


Why is this safe?

The great thing about decentralization is you can trust that transactions are executed correctly because there are thousands of computers executing them. Honest miners would reject such a transaction. With rollups, you don't have that level of redundancy.

The answer, in the case of optimistic rollups, is incentives. Every node in the network has to put up a stake before it can propose a new block with the execution results of a transaction. Every other node can check up on those results, and if it thinks they are incorrect, dispute them. The dispute is resolved on L1, so it is as trustworthy as anything else in Ethereum. Whichever node lies, either proposer or disputer, loses its stake and most of it goes to the other node involved.

Of course, the whole point is to avoid running transactions in L1. This system achieves that by making it pointless to cheat. Any proposer who attempts to cheat is going to be caught by the other nodes, lose its stake, and not get the invalid transaction result accepted as valid. A disputer can force a single transaction to go into L1 arbitration as a denial of service attack, but the stake is high enough that it wouldn't be worth doing.


How does Infura work with Optimism?

Infura exposes endpoints for Optimistic Ethereum (the production network) and Optimistic Kovan (the test network). You use them the same way you use any other network, by selecting them from the menu and using the specified endpoint.

There are a few small differences between building on Layer 1 Ethereum and Optimism:

1. You must use the JSON-RPC API as we do not support Websockets yet.
2. Search filters are not yet supported


How to Get Started on Optimism...



The main difference between Optimism and regular L1 Ethereum (other than the cost) is the access point URL.

| Network          | RPC URL |


… If you are using the Truffle development environment

Infura users can add the free Truffle Optimism add-on directly on their Infura dashboard. The Truffle Optimism box also contains the configuration definitions required to use Infura. Currently, you will need to manually add the gas costs of transactions when you use Truffle to run deployments or tests on Optimistic Kovan or the main Optimistic Ethereum network.


… If you are using Hardhat

To use Optimistic Ethereum or Kovan, edit hardhat.config.js's modules.export.networks to add these definitions:

"optimistic-kovan": {
    url: 'https://optimism-kovan.infura.io/v3/<Infura Project ID>',
    accounts: { mnemonic: <your account mnemonic goes here> },
    gasPrice: 15000000,
    ovm: true // This sets the network as using the ovm and ensure
                      // contract will be compiled against that.
},
"optimistic-ethereum": {
  url: 'https://optimism-mainnet.infura.io/v3/<Infura Project ID>',
  accounts: { mnemonic: <your account mnemonic goes here> },
  gasPrice: 15000000,
  ovm: true // This sets the network as using the ovm and ensure
                    // contract will be compiled against that.
}



Then you simply run:

npx hardhat --network optimistic-<kovan or ethereum> <command>



… If you are using Remix

When you use the Remix Optimism plugin to develop for Optimism, network connections are created through the wallet. If you use MetaMask, you can select the network Custom RPC and fill in the details:

What is Optimistic Ethereum?

Infura now supports additional networks including Arbitrum, Optimism and Polygon.

All three projects are essentially new blockchain networks. They offer low transaction fees and faster confirmation times compared to Ethereum. Crucially, they extend the utility of Ethereum as users can transact using their assets that fundamentally reside on Ethereum.

This scaling approach is called off-chain protocols and we have put together a short post to help explain how they help to scale (and extend the utility) of Ethereum.


Why not just transact on Ethereum? What is the scalability bottleneck?

Ethereum supports around 15 transactions per second and as seen in Figure 1 the network fees tend to skyrocket when users exceed the network’s throughput ceiling. In some ways, the throughput limitation is self-imposed by the community in the pursuit of decentralization.

The goal for decentralization is to maximise the percentage of the world’s population who can verify the blockchain’s integrity (and transactions) in real-time. This goal is essential to minimise the trust in block producers as the community can self-enforce the set of consensus rules that govern the validity of blocks. Depending on the target percentage of the world’s population, there is a limit to the computational, storage and bandwidth available to the network for processing transactions.

Our challenge as a community is to figure out how to increase the network’s throughput while adhering to the imposed resource constraints.


Why should we care about off-chain protocols like sidechains or rollups?

Most approaches to scale the network focus on:

 * Distributing verification. The verification task is distributed amongst nodes on the network as opposed to requiring all nodes to replicate the same work (Ethereum today).
 * Better utilize the network's available resources. The network's resources should be continuously utilised and not allowed to sit idle. For example, short block intervals to better utilize bandwidth.  

Scaling solutions still remain a few years away from adoption as they require major changes to the underlying Ethereum protocol.

An alternative and popular scaling approach, off-chain protocols, is a solution that is immediately available. It scales the network in a following way:

Off-chain protocols: Transaction processing is moved away from Ethereum to another network while still transacting with the same assets that reside on Ethereum.

We consider this a scaling solution as other blockchain networks are not limited by the same resource constraints as Ethereum. They can experiment with various scaling protocols (or simply test the limits of go-ethereum) while extending the utility of Ethereum.


Where are my assets held when transferred to another network?

A bridge contract is responsible for holding the user’s assets on one blockchain (Ethereum) and notifying the other network to mint an equal quantity of coins for the user. Once minted, the user can transact on the other network and eventually withdraw their funds back to the original blockchain (Ethereum) via the bridge contract.

Not all bridge contracts are equal. We must consider the bridge contract's process for deciding when to release funds back to the user. Ideally, the funds should only be released if the bridge contract is convinced the other network is not compromised. This is called the underlying trust assumption that ultimately protects the user’s funds. It can often cause controversy when discussing whether an off-chain protocol is truly scaling Ethereum.

On one hand, some users only consider a new blockchain network a scalability solution if the other network can retain the same (or very close to) security of Ethereum.  Protocols that can achieve this level of security are often called rollups. Whereas, other users will be satisfied with stronger trust assumptions as long as the funds locked into the other network are secure enough (sidechains).

Rollups, that retain the same security as the main-chain, will require more resources from Ethereum. For example, every transaction on the rollup network generates a state update that is published to the bridge contract. Whereas a side-chain does not necessarily require significant resources from Ethereum as validation of transactions is performed by a set of external parties. This trade-off on security/resources will be felt financially by the users and as a result there is no free-lunch.

Regardless, we believe that different bridge contracts will emerge and implement different degrees of trust. In the end, all blockchain networks which support transacting assets that reside on Ethereum will increase the utility of Ethereum. It is just important that users are aware of the trust assumptions and risks before deciding to lock funds into a bridge contract.


What is a sidechain?

The term sidechain originates from a paper by Blockstream. It was an interoperability solution to enable two blockchains to verify information about each other’s progress via light-weight proofs. The intention was to allow bitcoins to be locked in Bitcoin and to be released in the other network (and vice versa) without trusting any intermediary with the funds.

Over the years, the term sidechain has taken on a life of its own. It is often used to imply that an independent blockchain network has a relationship with another blockchain network. In practice, this is implemented with a bridge contract that allows assets to be moved from the main-chain (Ethereum) to another blockchain network.

There are three type of bridge contracts that are used for side-chains:

 * Single organisational. A single party has custody of the funds locked in the bridge contract.
 * Multi organisational. A fixed set of independent parties (K of N) has custody of funds that are locked.
 * Crypto-economic. A dynamic set of parties, determined by their weight in assets, have custody of the funds.

For example, WBTC is a single organisational bridge as the BTC is held by BitGo. The Liquid Network and RSK blockchain implement a multi-organisational bridge as an appointed set of parties will authorise assets to be moved across from one blockchain to another (i.e., implemented as a multi-sig). Polygon is a crypto-economic bridge as it relies on (⅔)+1 of stake to appoint validators who post periodic checkpoints about the network’s state to the bridge contract (and this checkpoint can be used to automate user withdrawals).

Crucially, the bridge contract for a sidechain does not verify the integrity of the other network and instead it relies on a set of parties to attest to its validity. It is assumed that at least a threshold of parties should have a financial incentive to remain honest and protect the user’s funds.

While the cost of a sidechain transaction consumes no additional Ethereum resources, the trade off is that the network will not retain the security of Ethereum and ultimately, trustlessness.


What is a rollup?

The term rollup originates from barry whitehat’s zkrollup and it emerged from the research on Plasma.

A rollup is still an independent blockchain network, but the transacted assets that reside on Ethereum are protected by the bridge contract. It must be continuously convinced the rollup network is not compromised and the funds are not at risk. In the worst-case, the bridge will bypass the other network and allow users to unwind and eventually withdraw their funds.

A rollup can retain the same (or very close to) the security of Ethereum and this is accomplished by solving the following problems:

 * Data availability. The bridge contract must be convinced that all data is publicly available. This allows anyone to independently compute the rollup’s stateful database.
 * State transition integrity. The bridge contract must be convinced that all state transitions (transactions) are valid.
 * Censorship-resistance. The bridge contract will self-enforce transaction inclusion to ensure a user can eventually withdraw their funds if the network is compromised (or no longer making progress).

As a quick summary on potential solutions. The data availability problem is solved by just posting all data to the Ethereum network and this is where the name rollup originates (to roll up the data). The state transition integrity problem is solved using a fraud proof (Optimistic rollup) or a validity proof (zero knowledge rollups) system. The censorship-resistance problem is a little trickier, and often not discussed, but it requires the bridge contract to self-force the inclusion and eventual execution of user-generated transactions.

There is an on-going financial cost for rollup. The network must continuously provide evidence to the bridge contract that all finalised transactions are valid and the network is not compromised. This consumes resources from Ethereum and impacts the scalability that is attainable by rollups. However in the immediate term, it can significantly reduce the cost of a transaction. For example, in Arbitrum, a swap costs 1,600 gas compared to 120,000 gas on Ethereum.


What is the difference between a sidechain and a rollup?

Sidechains, such as Polygon and rollups, such as Optimism and Arbitrum are just independent blockchain networks. They have their own set of block producers and smart contract environments. The core difference between a sidechain and a rollup is found in the bridge contract that locks funds from Ethereum onto the other network. Precisely, it is the trust assumption that protects the funds held by the bridge contract.

 * Sidechain. The bridge contract may receive information about the other network, but it does not validate its correctness. A set of parties who govern the bridge are responsible for checking the other network is not compromised and attesting this fact to the bridge contract.
 * Rollup. A set of parties (sequencers) are responsible for providing evidence about the state of the other network to the bridge contract. It is up to the bridge contract to validate the evidence’s correctness and to independently verify the other network is not compromised.

It is a subtle difference, but it boils down to whether the bridge contract can self-enforce the validity of transactions on the other network or if it must rely upon a trusted set of parties to attest that it is valid.

Of course, there is no free lunch. Rollup networks can retain the security of Ethereum, but it also consumes more resources of Ethereum. This increases the financial cost to transact on a rollup network compared to a side-chain.  As a user or developer, you will need to consider the security offered by the other network and the potential financial cost that it entails.

Choose a solution that best suits your use case.


How can I get started with rollups and sidechains?

You can check out our blog announcements for the networks we support which includes Arbitrum, Optimism and Polygon.

All networks adhere to the same JSON RPC standard as the Ethereum network and they support EMV-compatible smart contracts. You can activate the networks in your Infura account, update the provider URL and start interacting with the networks immediately.

Arbitrum and Optimism are still in beta and in the progress of preparing for their mainnet launch. You may need to contact the teams if you want to deploy a smart contract to their mainnet. Polygon is already launched and you can start deploying contracts immediately.

We hope you found this article about rollups and side-chains informative. At Infura, we have supported Ethereum for over 5 years and we are excited to now support new projects that extend the utility (and scalability) of Ethereum.

Off-chain protocols: Sidechains and Rollups

In part 1 of this series, we took a tour of IPFS, explored its significance, and explained how it works. Now, we'll show you how to get started with Infura’s latest IPFS service, including a tutorial on how to use our IPFS API to pin and unpin your data across the IPFS network, as well as upload and access files.

So, how do you pin your data across the IPFS network via the Infura API? It’s much easier than you think! Once you have an Infura account (sign up for free here), you will be able to upload your files to IPFS and access that data.

Our new IPFS service is currently in Private Beta and the following guide requires you to have access to the Beta. To sign up, click here!


First, let’s get a file uploaded to IPFS.

There are many ways to upload a file to IPFS, including going directly through IPFS locally installed on your machine or through the Infura API. For this tutorial, let’s go through how to add, access, pin, and unpin your file using Python and the Infura API. There are a couple ways to do this - in this tutorial, we’ll go through the manual step-by-step, and will provide you with some resources for using the API wrapper for when your IPFS needs get more complicated.

The first thing you need to do is make sure Python is downloaded on your machine (you can download it here), as our script is written in Python. Next, you’ll want to ensure you import requests:

import requests



Next, we want to identify the file we are uploading, as well as its contents, to be uploaded to IPFS. For our example, let’s do something simple and easy to check to make sure it’s working correctly:

import requests
files = {
'file': '<full_path_to_your_file>'
}
response = requests.post('https://ipfs.infura.io:5001/api/v0/add', files=files, auth=(<project_id>,<project_secret>))
print(response.text)



When you run `python3 <filename.py>, you should get a printout of information for the file you just added to IPFS, like the below:

You can see that we have been given the hash that was generated so we can easily reference this file to see it later. Keep an eye on that one - we’re going to use it later!

Lastly, note that in the parameters, we have one called `pin`, which is defaulted to “true” - this means that when you upload your file, it does pin it by default so you don’t have to worry about it. Pinned data will be persisted by Infura until manually removed by the uploader whereas added files that are not pinned will not have any access guarantees.

If you want to go the API wrapper route, you have a few choices, all with great documentation that should help you get set up quickly. Again, these wrappers allow you to complete more complex tasks more efficiently than using the above code, once you’re at that point:

 * Go: https://github.com/ipfs/go-ipfs-api
 * JavaScript: https://github.com/ipfs/js-ipfs
 * Python: https://github.com/ipfs-shipyard/py-ipfs-http-client
 * This one has been made by the community, so it’s a little less mature/used than the Go and JavaScript options above


Now we'll show you how to actually access your file.

We’re going to try to access the file we just uploaded to IPFS, so to do that, we will need to declare our parameters, which in this case is the hash we found in the last step:

import requests
params = (
('arg','QmeY7x2rEzyUxh2uwhXMqgBnPvcxzgNcQcUQWJG94Hv9ki'),
)



This allows us to put the hash in the proper location in our request we’re about to call to download the file and its contents. The next bit of code is very similar to what we did to add our file to IPFS, but note that we are using cat instead of add in our response:

import requests
params = (
('arg','QmeY7x2rEzyUxh2uwhXMqgBnPvcxzgNcQcUQWJG94Hv9ki'),
)
response = requests.post('https://ipfs.infura.io:5001/api/v0/cat', params=params, auth=(<project_id>,<project_secret>))
print(response)



At this point, if we print out our response, we’ll see a 200 status code, which tells us that we have successfully completed the request and can access the data contained in the response we have:

<Response [200]>




If you want to read your file, you can simply `print(response.text)` instead of just `print(response)` and you’ll be able to see the text!

Congrats! You added this file to IPFS!



You’ve now successfully uploaded and downloaded/read a file through the Infura IPFS API - congrats!


What if I want to keep my current data I’ve uploaded to IPFS?

With this new update, content that was previously uploaded to the Infura IPFS services via the unauthenticated API will need to be migrated to the new version of the service. We will announce a deprecation period for any unauthenticated pins very soon but don’t worry, you'll have ample time to move your data over. Luckily, moving your data to the new IPFS version is very easy with our new pinning option! Here’s a great blog post on how to migrate your data.


How do I pin an object to IPFS now?

Pinning an object basically allows you to tell IPFS to always keep a given object. Pinning your file will prevent the IPFS service from garbage collecting your object, in other words, it’ll prevent your object from disappearing automatically via garbage collection until you explicitly unpin it. We’ll go through an example of each pinning command located in our documentation:

To pin your file, you will want to use the `pin_add` command. Note: if you upload your file with the above instructions, your file will be automatically pinned and you do not need to do this step!

import requests
params = (
(‘arg’, ‘QmeY7x2rEzyUxh2uwhXMqgBnPvcxzgNcQcUQWJG94Hv9ki’),
)
response = requests.post('https://ipfs.infura.io:5001/api/v0/pin/add', params=params, auth=(<project_id>,<project_secret>))
print(response.json())



When you run this, you should see the something like the following with your pin’s information:

{'Pins': ['QmeY7x2rEzyUxh2uwhXMqgBnPvcxzgNcQcUQWJG94Hv9ki']}




I don't need my object anymore - can I unpin it?

As we mentioned, your object will stay pinned until you unpin it. To unpin an object, you’ll need to remove it from local storage by running `pin_rm`.

import requests
params = (
('arg','QmeY7x2rEzyUxh2uwhXMqgBnPvcxzgNcQcUQWJG94Hv9ki')
)
response = requests.post('https://ipfs.dev.infura.org:5001/api/v0/pin/rm',params=params, auth=(<project_id>,<project_secret>)
print(response.json())



Again, if you just want confirmation that your unpin worked, you can run `print(response)`, or if you want to see the printout, simply run the above command and you’ll get the below (which looks exactly like the printout from pinning your file):

{'Pins': ['QmeY7x2rEzyUxh2uwhXMqgBnPvcxzgNcQcUQWJG94Hv9ki']}



And that’s it! You now know how to add, pin, and unpin files to IPFS using Infura. Have fun! Check out our documentation for a full list of our current supported functionality and the associated urls you can use to implement the call of your choice:


What’s next?

Subscribe to our newsletter so you can be the first to know when new products launch. As always, if you have questions or feature requests, you can join our community or reach out to us directly.

Part 2: Getting Started with Infura’s IPFS Service - UPDATED June 2021

The developer demand for scaling solutions that work directly with Ethereum is here and growing, so today we are very excited to launch API support for the Polygon PoS network on Infura. Polygon PoS is a thriving solution that we are thrilled to be supporting as it adds a ton of value to the community of developers building with our tools.

Polygon PoS  is a hybrid Plasma Proof-of-Stake sidechain to the Ethereum mainnet which consists of a Tendermint consensus validator layer and a Plasma sidechain for block production. This configuration allows for higher transaction throughput, lower gas fees, and through Polygon's established bridges, easy connection back to the Ethereum mainnet. Check out Polygon's full getting started docs for more information.

The Infura Polygon network API largely utilizes the same JSON RPC specification as Ethereum and Infura will support all the necessary API methods for building a fully functional application on the Polygon network. To get started all you have to do is add the new Polygon Network Add-on to your account. To do this, login to your Infura account, go to your Ethereum workspace/project list and click to upgrade your plan,

From here you will see the new Network Add-ons section, select the Polygon network add-on,

You will be taken to a quick checkout page where you can finalize your account changes and you will be all set up and ready to go!

You can find all of the documentation for the new APIs here. If you have any questions, feedback, or just want to chat reach out to us at our community page.

Our colleagues at Truffle are also adding a great new tool to help developers start building right away on the Polygon network. The new Truffle CLI integration will simplify the process by which a developer can instantiate, compile, and deploy an application vis-a-vis Polygon PoS, using a boilerplate Polygon Truffle project (a “Truffle Box”). In addition to enabling development for Polygon PoS, The Polygon Truffle Box includes detailed instructions for configuring and using a Truffle project to interact with the Polygon PoS chain. Both Infura and Truffle will support the Polygon PoS mainnet and Mumbai testnet. You can access all of the new Truffle Polygon tools here.

We are very excited to be adding Polygon PoS to our development suite and we can't wait to see all of the amazing applications built with these tools. Stay tuned as we continue to add more networks, features, and products that accelerate and simplify development on this exciting new technology.

Want instant, scalable, and reliable API access to the Ethereum, Eth2, IPFS, and Filecoin, and Polygon networks? Sign up for our Core service to start building for free today. Need more request volume and direct support? Check out our premium plans and pick the right plan for your project.

Twitter | Newsletter | Community | Docs | Contact | We're Hiring!



Infura and Truffle Now Support Polygon

Non-fungible tokens have been the talk of the town this past month. From the sale of Beeple’s “Everydays: The First 5000 Days” for $69.3MM to NBA Top Shot surpassing $500MM in sales, to EulerBeats already generating over $2MM in royalties, interest in NFTs continues to rise. While it may be too early to say whether NFTs will radically disrupt the world of media, this movement is undeniably forcing us to reconsider deeply held notions of value. Provable scarcity, verified authenticity, and decentralized ownership rights open up a world of possibilities for a new virtual economy and we’ve only just begun to scratch the surface.


Can NFTs Crack Royalties And Give More Value To Artists?

NFTs are changing the way we understand ownership on the internet. The ERC-721 standard that led to the booming market of NFTs is now being revised to allow for a more dynamic standard for paying out royalties, no matter the platform that mints the NFT. EulerBeats, a project from Treum, represents a new way of storing a verifiably unique piece of audio on Ethereum, where future sales are automatically paid out to the original owner, already facilitating over $2 million worth of royalties.


How Barter Built a Direct NFT Trading Interface for Real-time Negotiation

Barter, a project built by ConsenSys Academy student Robert Clark, is specifically engineered for a future where video game assets are tradeable and where the Metaverse begins to emerge as a social phenomenon. With Barter, a direct trading interface between two people allows for real-time negotiation as well as new item discovery. We walk you through how this developer built Barter from the ground up, using Infura and Truffle.


The Financialization of NFTs

Many projects are looking to bring liquidity to NFTs, allowing the holders to earn yield. We examine three of the leading projects looking to financialize NFTs: NFTX, Charged Particles, and Aavegotchi. NFTX allows users to create funds of NFTs that they can then trade on decentralized exchanges like Uniswap, while Charged Particles allows users to add interest bearing tokens to their NFTs. Finally, Aavegotchi introduces some interesting game theory to interest bearing NFTs so that the user must decide between the interest and the NFT itself.


Introducing Palm NFT Studio

This past week, ConsenSys, HENI Group, and Heyday Films launched Palm, a new token-powered ecosystem for NFTs, which is connected to Ethereum, and features low gas costs, fast transaction finality, and 99% more energy efficiency than PoW systems. We are very excited to help power the Palm project alongside notable partners like Uniswap, $MEME, Nifty’s, Protocol Labs, and MetaMask, and the legendary artist Damien Hirst. More details coming soon 👀


Claim Infura Bounties at the Chainlink Spring 2021 Hackathon Happening Now!

Chainlink Hackathon 2021 is in full swing, and we are thrilled to sponsor this years event. The hackathon runs from March 15 - April 11, so you still have time to jump in and hack on some bounties from Infura and Codefi! Our very own EG from Infura will be judging the bounties as well. So jump in and let’s build!

Infura Bounty: We have recently released Infura Transaction Service (ITX). It is a high-throughput relayer that is optimized to reliably send transactions to the Ethereum mainnet in a timely manner while ensuring all transactions do not needlessly overpay the network fee. It is a simple API that is easy to plug-and-play for most projects. Our bounty focuses on integrating ITX with the Chainlink Oracle system (node). The final solution should allow node operators to activate ITX via a config file (or an additional parameter) at the command line. Once it is turned on, all transactions for the oracle will be sent via the ITX service. We hope this integration will help Chainlink fall from the Top 25 Leaderboard for services that pay the most Ethereum network fees and thus reduce the cost of being a Chainlink operator. $1,500 goes to the Infura Project Winner!


Customer Spotlight: ParaSwap

The DEX aggregator ParaSwap used to rely on their own in-house infrastructure, which quickly proved to be very challenging to maintain and scale. Learn why ParaSwap chose to scale their infrastructure with Infura.


Introducing Ethereum Request Packs

Unlock greater request volumes and right-size your account for your daily usage with Ethereum Request Packs: 1,000,000 additional daily requests for only $200 per month!


Deprecation Notice

With the launch of our Eth2 API public beta, we will be deprecating the sharing of project IDs between the Eth1 and Eth2 APIs on April 1, 2021. Here’s what you need to do.


Signal Podcast: Episode 1 with Joe Lubin

Why are financial systems broken? What was it like to launch Ethereum? What is the relationship between collectivism and open-source? How can the banking world mesh with the next generation of financial infrastructure? Check out the first episode of SIGNAL, where Lex Sokolin sits down for an interview with Ethereum Co-founder and ConsenSys CEO, Joe Lubin, to learn about the beginnings of the crypto ecosystem, his experience with AI at Princeton, what he learned at Goldman Sachs, and how all these adventures shaped his vision today. The episode is available on Spotify, Apple, and RSS.


New Developer Resources

 * 100+ Ethereum Apps You Can Use Right Now. As crypto mixes with culture, dapp offerings continue to diversify and mature. Many visionary projects dissolved into the ether during the long, cold bear market, yet we can feel their traces in brilliant apps we love and use today.
 * How To Safely Migrate Your Ethereum 2.0 Validator Client. Coogan’s last installment of “My Journey to Becoming a Validator on Eth2,” teaches you how to safely migrate your validator from one virtual service provider (AWS) to another (Digital Ocean). Having the same validator keys on two different instances could result in the slashing and freezing of my staked ether, but luckily there exists slashing protection in the form of EIP-3076, a JSON file with a list of all the blocks and attestations the client has made.
 * The ConsenSys Product Suite. We revamped our product page to help people get started with our suite of products: Codefi, Diligence, Infura, MetaMask, Quorum, and Truffle. Six products. One mission. To empower developers, enterprises, and people worldwide to access and build on Ethereum.

Want instant, scalable, and reliable API access to the Ethereum, Eth2, IPFS, and Filecoin networks? Sign up to start building for free today. Need more request volume and direct support? Just like our infrastructure, our pricing scales to fit your application.

Twitter | Newsletter | Community | Docs | Contact | We're Hiring!

News

Infura | March 2021 Update

The Meteoric Rise of NFTs

If you’ve been following the crypto space lately, you’ve probably seen that Non-Fungible Tokens (NFTs) have been the talk of almost every artist and creator. From the sale of Beeple’s “Everydays: The First 5000 Days” for $69.3M to NBA Top Shot surpassing $205 million in total sales within six months to EulerBeats generating more than $1.1. Million in royalties during its first week, interest in NFTs is at an all time high. Across the board, we have seen NFTs enable the financialization of digital goods: art, music, content, virtual land, gaming collectibles, and essentially anything that benefits from verified authenticity and provable ownership rights.

While artists have been continuously setting records with their sales, the NFT marketplaces and galleries have also been exceeding expectations. Currently, the gallery model, which curates an exclusive selection of art for buyers like a traditional art gallery, has been generating less volume compared to marketplaces, which are akin to an art bazaar where anyone can display their works for sale. For example, the curated nature of Nifty Gateway and SuperRare limits the number of artists who are allowed on the platforms, creating an allure of brand recognition and exclusivity compared to platforms like OpenSea and Rarible which allow anyone to post their NFT. That being said, both models have experienced immense growth in this NFT boom.

Monthly protocol users for Rarible, a leading NFT marketplace, hit an all time high for March, surpassing 58,000.

Data Source: Dune Analytics

Superare, the top NFT gallery, surpassed $15 million in volume for the month of March.

Data Source: Dune Analytics

Artists sold 2,000 works on SuperRare in March, marking an all-time high for the gallery.

Data Source: Dune Analytics

Currently, NFT aggregators, issuance protocols, and generalized marketplaces are driving the growth of the NFT space and are the more obvious market opportunities. Below are a handful of the leading art platforms and marketplaces today:

Source: Messari

It’s undeniable that the market is assigning real value to provable digital ownership and this new open creative economy is here to stay. Over time, we expect to see value continue to flow into these marketplaces and competition to heat up as new novel platforms are introduced. We also expect that the success of these platforms will ultimately come down to their ability to attract users and creators by devising markets for participants to easily mint, collect, showcase, and trade art and collectibles. The question now becomes: given the current NFT landscape, where are the opportunities and how can we build marketplaces to address the needs of this growing niche?

While there are many NFT marketplaces we could explore, we thought we would take the time to introduce a new project called Barter, recently built by a ConsenSys Academy student. We’ll show you how the project implemented an on-chain order book for NFT trading, and how they plugged in Infura and Truffle to get it off the ground quickly. After you review this project, you can better understand how these marketplaces can be created, and the additional opportunities that exist for them.


How I Built This: Barter

Barter is a project built by Robert Clark, a student from ConsenSys Academy that is specifically engineered for a future where video game assets are tradeable and where the Metaverse (as coined by Neal Stephenson) begins to emerge as a social phenomenon. People already buy, collect, and curate assets inside video games (characters, armor, weapons, etc) so the ability to trade them directly with other players would be explosive. With Barter, a direct trading interface between two people allows for real-time negotiation as well as new item discovery. This creates a more natural trading experience that is already the norm across games like Rocket League and Runescape.

In this section, we walk you through how this developer built Barter from the ground up, using Infura and Truffle.


Project Structure

Barter's user interface is quite simple, consisting of a one-page react app that can toggle between the “trade proposal” page and the “offers” page. Once a user has connected their Metamask account and added the recipient’s address, they click ‘Propose Trade’ and create a trade offer. A transaction prompt appears and allows them to send the offer on-chain. For the user on the other side of the trade, an offer will pop-up for them in the offers box, accessible via the button in the top right corner. This offer will give them a brief overview of the NFT and its price, along with an accept and reject button. If the user clicks accept and sends the prompted transaction, the trade will execute.

On the Solidity side, Barter was set up as an on-chain order book for NFT trading. In order to successfully complete an NFT trade between two users, one user first must create an offer and post it to the contract. Offers are address specific, so the user making the offer must know who they want to trade with ahead of time in order to successfully complete the trade. Once the offeror is done configuring their trade in the UI, they can proceed to posting a TradeOffer, an instance of which is shown below:

struct TradeOffer {
        address payable offerer;
        address payable asker;
        uint[] offer;
        uint[] ask;
        address[] offerContract;
        address[] askContract;
        uint offerLength;
        uint askLength;
        uint offerVal;
        uint askVal;
        uint feePaid;
        State state;
    }


This offer is made up of 4 main pieces of information;

1) the trader addresses,

2) arrays of offered and asked NFT IDs,

3) arrays of offered and asked NFT Contract addresses, and

4) an optional amount of ETH val that can be added to either side of the offer.

The contract tracks an array of every offer posted, and has many safeguards put in place to make sure there are no ways for NFTs or ETH to be sent around without proper completion of an offer. For example, the addOffer function as shown below is made up almost entirely of different require statements. In order to make an offer, the contract first must verify that the offeror actually owns the NFT, has submitted the right amount of ETH as a fee, and has tried to trade at least one NFT, among other verifications.

function addOffer(uint[] memory _offer, address[] memory _offerContract
                    , uint[] memory _ask, address[] memory _askContract
                    , uint _offerVal, uint _askVal, address payable _targetAddress) 
                    public payable stopInEmergency() returns (bool) {
 
        require(_offer.length >= 1 || _ask.length >= 1);
        require(_offer.length == _offerContract.length);
        require(_ask.length == _askContract.length);
        require((_offerVal+fee) == msg.value);
        for(uint i = 0; i < _offer.length; i++) {
            ERC721 con = ERC721(_offerContract[i]);
            require(approvedERC721[_offerContract[i]]);
            require(con.ownerOf(_offer[i]) == msg.sender);
            require(con.isApprovedForAll(msg.sender, address(this)));
        }
 
        for(uint i = 0; i < _ask.length; i++) {
            require(approvedERC721[_askContract[i]]);
        }
 
        emit LogOfferAdded(offerCount, msg.sender);
        offersByAddress[_targetAddress].push(offerCount);
        offerCountByAddress[_targetAddress] = offerCountByAddress[_targetAddress]+1;
        offersCreatedByAddress[msg.sender].push(offerCount);
        offersCreatedCountByAddress[msg.sender] = offersCreatedCountByAddress[msg.sender]+1;
                offers[offerCount] = TradeOffer({offerer: msg.sender
            , asker: _targetAddress
            , offer: _offer
            , offerContract:_offerContract
            , ask: _ask
            , askContract:_askContract
            , offerLength:_offer.length
            , askLength:_ask.length
            , offerVal: _offerVal
            , askVal:_askVal
            , feePaid:fee
            , state: State.Active});
        offerCount = offerCount + 1;
        
        return true;
    }


There is a similar set of checks for accepting a trade, as the original offeror may have ditched all the NFTs they originally had after the offeree took too long to accept. This is slightly redundant from a security standpoint but it protects against offers being created when they have no hope of being accepted.


Plugging in Infura and Truffle

Using Truffle along with Infura made the connection to a testnet (Ropsten) straightforward and easy. There was a declaration of the mnemonic from the HDWalletProvider along with our Infura ProjectID. Then we simply acquired some Ropsten ETH from one of the faucets available and used the boilerplate Truffle code to migrate to Ropsten. Once it was successfully deployed, we got the contract IDs and replaced the contract variables in our React code to point to the correct contracts.

ropsten: {
   provider: () => new HDWalletProvider(mnemonic, `https://ropsten.infura.io/v3/${infuraKey}`),
   network_id: 3,       // Ropsten's id
   gas: 5500000,        // Ropsten has a lower block limit than mainnet
   confirmations: 2,    // # of confs to wait between deployments. (default: 0)
   timeoutBlocks: 200,  // # of blocks before a deployment times out  (minimum/default: 50)
   skipDryRun: true     // Skip dry run before migrations? (default: false for public nets )
   }//,



Future State

The on-chain order book design choice of this project has certain limitations. Every offer must be a transaction, which can get expensive when Ethereum is nearing full utilization. But if this project is deployed on a high throughput layer two (L2) solution, potentially one with video game assets with low enough value to merit trading en masse, this interface could be a very useful tool.

Changes to the user interface, from a matching engine perspective, could open up other possible extensions for this project. Unlike the OpenSea bulletin board approach, the trading interface approach could be extended to allow users to set preferences for acquiring different types of items, and a multi-party trade matching engine could sort through different ways to help them acquire that item. Say party 3 has an item you want, and you have what party 2 wants, but not what party 3 wants. The interface could set up a 3 way trade to satisfy all parties involved.

One final nuance that is interesting to consider is that usually when interfaces are built like this, they are for one specific game. Because of the interoperability of ERC-721 this can be extended to trade any two things of value. You could trade a digital painting for Metaverse outfit, or even swap deeds to your homes with a friend.


Conclusion

Overall, we’re fascinated by the increase in interest and evolution of NFTs and expect to see even more activity in the coming year. We’re proud that developers are leveraging Infura to build decentralized apps that allow creators to share art and interact directly with an enthusiastic community of collectors.

Building an NFT project? Infura is a critical part of your toolkit. Sign up for free and unlock robust, scalable tools for Ethereum and IPFS development.

Twitter | Newsletter | Community | Docs | Contact | Open Roles

Huge thanks to Robert Kruszynski and Mattison Asher for their contributions to this guide. For more Web3 tutorials, check out the Infura Blog and ConsenSys Academy.

How Barter Built a Direct NFT Trading Interface for Real-time Negotiation

Add 1 million daily requests to your Ethereum API subscription for only $200 USD per month!

Ethereum Request Packs are here! Now Infura customers (on any subscription tier) can add increments of 1,000,000 daily requests to their account for $200 per month!

Say you’re subscribed to the Team tier and are currently allotted 1,000,000 requests per day. You can now add an additional 1,000,000 requests per day, bringing you to a total of 2,000,000 total daily requests for $425 per month. You can add multiple Request Packs directly in your Dashboard until you reach a limit of 100MM total daily requests. If you need more than 100MM/day, please reach out to us and we will set you up with a custom account.


How to Get Started

To add Ethereum Request Packs to your account, click Change Plan in your Dashboard, select Request Packs, and designate the number of packs you’d like to purchase.

Once you've successfully checked out, your Billing page will be updated to reflect your new daily request limit.

That's it! If you need help at any time, join the Infura Community to connect with the team or drop us an email at support@infura.io.


Other Updates from Infura:


Why You Should Use ITX Instead of Building Your Own In-House Relayer

We know how frustrating stuck transactions can be so that’s why we’re rigorously working to solve transaction management friction for the industry. Check out this post where we outline three critical problems that currently prevent developers and DeFi users from getting more efficient transactions on Ethereum, and how you can use Infura Transactions to eliminate this friction to create a better end user experience.


ICYMI, MetaMask Launched a Custom Networks API to Improve Layer 2 Support

The API now enables developers to recommend Layer 2 networks, like Polygon (formerly Matic), Arbitrum, and Optimism; sidechains like SKALE and xDAI. Once connected and configured, these networks are added to the user’s network menu, enabling the user to switch between networks. If you’re operating a dApp that integrates with MetaMask, and want to start onboarding more users to Layer 2 networks, check out MetaMask’s latest post.


Notice: Eth2 Public Beta Deprecation of Project IDs

ICYMI: Our Eth2 API is publicly available! Please note that on April 1, project IDs used in our Eth2 private beta will no longer be accepted in the public beta. More details and what to do.


We’re Ready for the Berlin Fork

Ethereum mainnet is currently targeting the Berlin fork for April 14, 2021 at block height 12,244,000. Using Infura? No changes required! Running your own node? How to get fork-ready.


New Developer Tutorials!

 * Want to jump into Filecoin and start building something? This tutorial will get you up and running quickly by creating a simple Node.js script using Infura and the Filecoin network.
 * How to Access the Eth2 API Pyrmont testnet

Want instant, scalable, and reliable API access to the Ethereum, Eth2, IPFS, and Filecoin networks? Sign up for our Core service to start building for free today. Need more request volume and direct support? Check out Infura+ to pick the right plan for your project.

Twitter | Newsletter | Community | Docs | Contact | We're Hiring!

Recent Posts (page 18)

Part 2: Getting Started with Infura’s IPFS Service - UPDATED June 2021

Infura and Truffle Now Support Polygon

Infura | March 2021 Update

How Barter Built a Direct NFT Trading Interface for Real-time Negotiation

Introducing Ethereum Request Packs!